Chill CP-450F 450W ATX Nätaggregat, +85%

- Riktiga 450W Ultra stabil strömförsörjning
- 120 mm Ultra Silent Fan
- +85% Verkningsgrad, <1W Standby
- Aktiv PFC (> 0,9 PF)
- Dubbla 12V Ström Rails
- High-Grade "Long-Life" kondensatorer
- Full svart kabel skyddsstrumpa
- Löstagbar 20/24-pin ATX-kabeln
- Löstagbar 4/8-pin EPS12V-kabel
- ATX 2,3 & EPS 2,92 Design
- Energy Star V5.0 överensstämmelse
- RPM Övervaka kabel

Mer detaljer

CP-450F
Nya

Lägg till Jämförelse

 
Mer information

Discontinued

The Chill CP-450F ATX Power Supply (PSU) offers real 450W rated at 50°C, ultra high efficiency (+85%) and State-of-the-Art noise/thermal management for the demanding user. Even at high load this new advanced unit will offer the lowest noise ratio in the industry.

Chill CP-450F is equipped with high-grade components, long-life 105°C capacitors as well as Dual 12V power rails to ensure the high level of performance and stability. It features 8-pin EPS12V support for Dual/Quad Core systems and even PCI-Express V2 (6+2pin) connection for demanding VGA cards. This Power supply also complies with the RoHS directive (Restriction of Hazardous Substances), which limits the use of Lead and other substances damaging to the environment. Together with the ultra high, Energy Star V5.0 compliant, +85% efficiency design and low standby consumption (<1W), this not only benefits the environment but also your electrical bill as well. The Active PFC circuit (Power Factor Correction) allows power distribution to operate at its maximum efficiency - Made to offer the highest possible efficiency and lowest possible heat waste.

The virtually silent operation conditions have always been a key trademark and continue to amaze noise enthusiasts around the world. The advanced thermal controlled fan management system provides heat dissipation superior to conventional power supplies. The 120mm Ultra-silent fan will not just remain silent at idle/normal load like most other silent PSU's. It can even improve case airflow and lower the overall PC system temperature. The RPM Monitor (Revolutions Per Minute) feature will let you monitor the actual speed of the built-in fan, if your motherboard support it. Now this is True Power - No Noise!

Skriv din recension

Chill CP-450F 450W ATX Nätaggregat, +85%

- Riktiga 450W Ultra stabil strömförsörjning
- 120 mm Ultra Silent Fan
- +85% Verkningsgrad, <1W Standby
- Aktiv PFC (> 0,9 PF)
- Dubbla 12V Ström Rails
- High-Grade "Long-Life" kondensatorer
- Full svart kabel skyddsstrumpa
- Löstagbar 20/24-pin ATX-kabeln
- Löstagbar 4/8-pin EPS12V-kabel
- ATX 2,3 & EPS 2,92 Design
- Energy Star V5.0 överensstämmelse
- RPM Övervaka kabel

Skriv din recension

 
FAQ

Chill Innovation ATX Power Supplies: 

Will the Chill Power Supplies increase my system temperature due to the virtually silent operation?
No, our heat dissipation technology is superior to most conventional Power Supplies and will actually help reducing your system temperature and improve case airflow. Other Silent PSU's will have a higher chassis- and operating temperature and less good airflow, due to the reduced fan speed. Then you would just need additional case fans, that in return will result in higher noise levels. Pointless!


Does the Chill Power Supplies fit all computer cases and motherboards?
The latest Chill Power Supply series fit all cases and motherboards complying with the ATX 2.x standard. Older hardware, typically from before year 2003-2005, might be based on the older out phased ATX1.x standard featuring other specifications and a -5V rail among others. Check your documentation for requirements / compliance. Most of our older models features ATX1.3 compliance including a -5V rail (check output specifications / PSU label), but these models are no longer in production since mid 2006.

All of our 'Modular' based Power Supplies comes with extended 20/24-pin Main-ATX and ATX12V/EPS12V cable length, in order to offer better support for PC cases with bottom mounted Power Supply.


How does the RPM Monitor feature works?
Your motherboard has to support this feature. Connect the signal cable from the PSU to a 3-pin POWER/CASE FAN plug on the motherboard. Monitor software should be supplied with the motherboard or 3rd party. With this feature you will be able to monitor the fan speed of the built-in fan to ensure it is running properly and to get an idea of your current load/temperature conditions inside.


Can I count on the Voltages readings provided by the Mainboard/BIOS?
No, not at all unfortunately!. The only way to get accurate voltage readings is to use a good Multimeter / Voltmeter. It is not unusual the motherboard probe readings will differ up to +/- 1V from the actual rating.


Can I count on my 'Energy meter' when measuring PC Power / Standby consumption?
Unfortunately, most cheaper 'Energy meters' cannot measure inductive load from Switch Mode based products correctly. Computer Power Supplies, as well as most other modern home electronics like televisions, DVD / Blue-ray players, game consoles etc. are based on Switch Mode technology. On such products you will get incorrect Watt readings, especially for lower loads, such as Standby consumption.

Make sure your 'Energy meter' has inductive / Switch Mode support in order to get correct readings. However it does take expensive PRO equipment for fully accurate readings on Switch Mode based products.

All current Chill Power Supply models only have 0,4 - 0,9W Standby consumption. Please notice, that your motherboard and connected USB devices etc. also might have a standby consumption. You can normally adjust BIOS/jumper settings to prevent USB ports to be powered during standby and also disable Ethernet features like Wake-On-Lan (WOL) etc. which require standby power.

The Spar-O-Meter from the Danish Energy Saving trust can measure inductive load to some extend. 

Tillbehör

6 andra produkter i samma kategori:

Jämför 0

No products

To be determined Frakt
DKK 0,00 Moms
DKK 0,00 Total

Kassa