Chill 3-port USB Ladegerät, LED Display, 5V/3.1A, Smart-IQ, EU

- Universal 3-port USB Ladegerät
- LED Display mit Volt & Ampere
- Schnelle Aufladung (Ausgang 3.1A)
- Auch kompatibel mit iPhone, iPod & iPad
- Smart-IQ Auto-Erkennung
- Schutzschaltung
- Ultra hoher Wirkungsgrad (~90%)
- Zugelassen für die EU

Mehr Infos

Reduzierter Preis!
Neues Produkt

DKK 129,00inkl. MwSt.

DKK 169,00inkl. MwSt.

-DKK 40,00

Sofort Lieferbar!

- +

Hinzufügen zum vergleichen

Mehr Infos

Chill Smart-IQ USB Auto Detect

Hohe Qualität Chill 3-port USB Ladegerät mit LED Display für die Stromversorgung und Aufladung aller Arten von USB-Geräten wie Smartphones, Tablet PCs, GPS, Digitalkameras etc.

Mit einem leistungsstarken 3.4A Ausgang dieses Chill USB Ladegerät mit Smart-IQ Auto-Erkennung kann schneller aufladen als die meisten normalen USB-Ladegeräte.

Mit dem LED-Display können Sie den aktuellen Stromverbrauch (Volt & Amp) der angeschlossenen Geräte ablesen. Auf diese Weise können Sie ständig feststellen, wie viel Strom gerade verbraucht wird und sicherstellen, dass das Ladegerät nicht überlastet wird.

Diese Universal Chill 3-port USB-Ladegerät haben auch eine Schutzschaltung Chip eingebaut für zusätzliche Sicherheit im Vergleich zu billigen Standard USB Adapter. Zugelassen für EU!

Mit dem extrem hohen Wirkungsgrad (+90%) ist der Stromverbrauch auch deutlich niedriger als bei den meisten Standardadaptern.

Universal USB-Netzteil:
Wechselstrom-Eingang: 100-240V~, 0.5A, 50 / 60Hz
DC-Ausgang: DC 5V 3.1A (max)
LED Display

LED Display:
Wenn das USB Ladegerät eingeschaltet ist, schaltet das LED-Display automatisch 4 Mal zwischen Volt (rote Anzeige) und Ampere (grüne Anzeige) um. Danach zeigt Ampere den Verbrauch in Echtzeit an.

Note: Es ist immer das angeschlossene USB-Gerät, das steuert, wie viele Ampere gezogen werden, niemals die Ladegeräte. Normalerweise variiert dies während des gesamten Ladezyklus und ist normalerweise bei niedriger / hoher Batteriekapazität geringer.

Das USB-Ladegerät passt automatisch die Spannung leicht höher als 5V an, um die Effizienz zu erhöhen und den Verlust durch die Kabel zu kompensieren.

Technische Daten
Type: USB Charger / Power Supply
Features: Smart-IQ Auto Port Detection, LED Display
Support: Realtime Voltage + Ampere (LED Display), Auto Standby
Capacity: 3x USB-port
Output: DC 5V/3.1A (max. 2.4A per port)
Input: 100-240V ~, 0.5A, 50/60Hz
Conversion Efficiency: ~90% nominal
Power Save Controller: Auto Standby
Protection: Short Circuit, Over Current, Over Charging
Material: ABS
Operating Temperature: 5°C to 45°C
Storage Temperature: 5°C to 35°C
Operating Humidity: Max 85%, non-condensing
Product Dimensions (H x W x D): 94 x 46 x 25 mm
Packing Dimensions (H x W x D): 140 x 110 x 26 mm
Gewicht: 60g
Weight (Gross - incl. packing): 57g
Safety / Compliance: CE, RoHS
Verpackung / Eingeschlossen: Blister

Eigene Bewertung verfassen

Chill 3-port USB Ladegerät, LED Display, 5V/3.1A, Smart-IQ, EU

- Universal 3-port USB Ladegerät
- LED Display mit Volt & Ampere
- Schnelle Aufladung (Ausgang 3.1A)
- Auch kompatibel mit iPhone, iPod & iPad
- Smart-IQ Auto-Erkennung
- Schutzschaltung
- Ultra hoher Wirkungsgrad (~90%)
- Zugelassen für die EU

Eigene Bewertung verfassen

Holder hvad den lover!

Positivt overrasket over denne Chill oplader. Udover LED skærmen selvfølgelig er en lækker detalje (og faktisk ret præcis), så er ydelsen og kvaliteten også ret god. Har kørt full load test i mange timer nu uden problemer. Har futtet flere Kina, Netto og Lidl opladere af blot ved at belaste dem til deres oplyste output. Rart at se en lader som rent faktisk leverer det den lover!

  • Ist dieser Kommentar für Sie nützlich?
  • (0) (0)

Skulle egentlig bare have en bedre USB oplader, og faldt så over denne her med LED Display - og det er jeg glad for jeg gjorde!

Det er simpelthen genialt nu at kunne få et indblik i strømforbruget. Det har ligeledes medført, at jeg har kunne konstatere MEGA forskelle i mine kabler. Så alene ved at få
sorteret ud i disse, har jeg nu kunne booste mine opladningstider markant.

Laderen slukker også selv og viser, når udstyret er opladt. Genial lille sag!

  • Ist dieser Kommentar für Sie nützlich?
  • (0) (0)

Eigenen Kommentar verfassen!


FAQ: USB chargers

How powerful USB charger should I use with my equipment?

It's always the connected USB devices which control how much power it will draw from a USB charger - not the other way around. So you can not buy a too powerful USB charger, thus damaging the equipment.

The more powerful USB charger, the more power the attached devices will also be able to draw, and thus obtain the potentially fastest charging time.

If a USB device is designed for maximum Max 1A input, it will not be able to draw more than this, just because you connect it to 2A based USB charger instead. However, there are big differences in quality of USB chargers (and cables), so by using a better / stronger USB charger you wil ensure it actually also have enough power available. Secondly the conversion efficiency is also typically better, in better/stronger chargers, so it will overall also lower the electricity bill.

Many standard / cheaper USB chargers specified for example with 1A/2A Output will in real life only be able to deliver 70-80% of this. So by using a stronger quality USB charger instead (eg. With 2.4A/3.4A output), the attached devices will thus able to draw it's full potiential, and thereby actually charge 20-30% ​​faster.

What is Chill Smart IQ?

Apple products do not follow the regular USB standard and therefore USB chargers needs to be optimized for either Apple products or others, like Android. This limits the functionality significantly.

With the Chill Smart-IQ system the connected devices will be automatically detected as Apple or Non-Apple, and thus all USB devices will have full functionality on any available USB ports. 

For example the Chill 6-port charger offer 10A output and Smart-IQ. So this means you can connect any type of USB based device to any given port, and they can freely draw the needed currenct within the available capacity.

My Apple device say "not charging" when I use it with non-Apple chargers?

It is normal for Apple products depending on model, IOS version, cable etc. to say "not charging" when non-Apple chargers / cables / power bank etc. are detected. Apple primarily want you to use their own products only. However they should still be able to be charged!

Does charging time differ?

It is always the connected devices that control how much power they draw from a USB charger - NOT the charger that controls how much power delivered to the device.

One should actually just make sure that the USB charger has enough available power (Ampere output) for the connected device(s). If a USB charger can not actually deliver the needed power, the charging will thus also take longer.

In addition, cable length and quality also affect results. It is NOT given that USB cables can deliver the full potentiall needed by the  attached device.

No products will draw their maximum input power during a full charging cycle. This fluctuates with the battery capacity (typically only high power between the 30-70% battery), cable quality and length, temperature / air humidity and other conditions they might be designed for.

So charging time can vary according to the conditions. Typically mainly fluctuates based on remaining battery capacity and cable used (if you use different cables, you might notice different results). Last but not least, many cheap / no-name USB chargers are not able to deliver their specifified output ratings.

When should I consider a Quick Charge capable USB charger?

Your equipment should be decidedly Qualcomm Quick Charge compliant to charge faster on a Quick Charge charger. Check your documentation on your various devices (Many newer hi-end Smartphones support Quick Charge).

Quick Charge 3.0 is the latest and fastest standard. It is backward compatible with earlier versions, so you will therefore always be able to achieve the best results with a QC3.0 Charger. A Quick Charge USB charger can also charge ordinary - non QC compatible - USB devices.

Notice: Not all QC3.0 USB chargers supports dynamic voltage and therefore not optimal. All Chill's QC.30 compatible chargers can automatically regulate the voltage between 3.8V-12V and thereby offer optimal/faster charging conditions.

Why should I buy a Chill USB charger?

USB chargers are available in many grades and price points. It is basically not products which people care much about, despite typically used daily. Therefore, most USB chargers are made with a focus on price, and that means they typically compromise on performance, conversion efficiency and safety features.

Chill USB chargers always focus on performance / ratings and ultra high conversion efficiency (which lower the energy bill), as well as extended safety and functionality.

If you use a USB charger daily, then a Chill USB Charger could quickly pay for itself, due to a electricity savings. They all offer a higher conversion efficiency compared to most original / cheap / no-name USB chargers.

USB chargers are basically cheap to produce, so we think it is simply foolish to cut corners just to save a few bucks. The price difference between a cheap / poor USB charger and a high-quality real rated USB charger with good safety is minimal.


12 andere Produkte in der gleichen Kategorie:

Vergleichen 0

Keine Produkte

Noch nicht festgelegt Versand:
DKK 0,00 MwSt:
DKK 0,00 Gesamt:

Preise inkl. MwSt