Chill CP-700M 700W Modular ATX Strømforsyning, +85%

- Real 700W Ultra Stable Output
- Modular Design (removable cables)
- 135 mm Ultra Silent Fan, 11 blades
- +85% Efficiency, <1W Standby
- Quad 12V Power Rails (4 x 20A)
- High-Grade 'Long-Life' capacitors
- Full black cable Sleeving
- Latest ATX 2.3 & EPS 2.92 Design
- PCI-Express V2.0 (6+2-pin)
- Nvidia SLI & ATI CrossFire
- RPM Monitor cable

Flere detaljer

CP-700M
Ny

Føj til Sammenlign

 
Mere info

Udgået!

CP-700M 700W er en Modulær (aftagelige kabler) ATX Strømforsyning (PSU) der byder på ultra høj effektivitet (+85%) samt markedets laveste støjforhold. Slut med overflødige kabler der optager plads og blokerer luftgennemstrømningen - Du skal blot tilslutte de kabler, der er nødvendige for dit system!. Modulopbygningen giver også meget bedre fleksibilitet for opgraderinger og fremtidige kabel behov.

Med ægte 700W nomineret ved 50°C, er denne ATX 2,3 / EPS12V baseret strømforsyning i stand til at køre selv tunge Duo/Quad Core-baserede systemer. Den har fuld support for PCI-Express V2.0 (6+2- pin stik) og Nvidia SLI & ATI CrossFire. Med ultra høj effektivitet (+85%), et lavt standby forbrug (<1W), Active-PFC samt et RoHS (Restriction of Hazardous Substances) kompatibelt design, bekymrer vi os ikke blot om miljøet - men også for din elregning!.

Udstyret med high-grade komponenter og 105°C Long-Life kondensatorer, vil det effektive design hele tiden holde sørge for et perfekt output, stram volt regulering og ultra stabil støjsvag drift. Dette giver også et perfekt grundlag for ekstrem overclocking, 24/7 servere samt ultra-støjsvage gamer computere mv.

De stort set støjfrie drift forhold har altid været et vigtig Chill varemærke og fortsætter med at forbløffe støj entusiaster rundt om i verden. Den avancerede termiske blæserstyring, sammen med den enorme 135mm ultra-støjsvage blæser, vil altid sikre det lavest mulige støj-/ydelsesforhold i branchen. Den vil ikke blot være støjsvag under tomgang / normal belastning, som de fleste andre støjsvage PSU'er!. Den kan endda ligefrem forbedre luftstrømmen og sikre lavere system temperaturer i de fleste systemer, da den heller ikke bliver bemærkelsesværdig varm. Se det er True Power - No Noise!

Skriv en anmeldelse

Chill CP-700M 700W Modular ATX Strømforsyning, +85%

- Real 700W Ultra Stable Output
- Modular Design (removable cables)
- 135 mm Ultra Silent Fan, 11 blades
- +85% Efficiency, <1W Standby
- Quad 12V Power Rails (4 x 20A)
- High-Grade 'Long-Life' capacitors
- Full black cable Sleeving
- Latest ATX 2.3 & EPS 2.92 Design
- PCI-Express V2.0 (6+2-pin)
- Nvidia SLI & ATI CrossFire
- RPM Monitor cable

Skriv en anmeldelse

 
FAQ

Chill Innovation ATX Power Supplies: 

Will the Chill Power Supplies increase my system temperature due to the virtually silent operation?
No, our heat dissipation technology is superior to most conventional Power Supplies and will actually help reducing your system temperature and improve case airflow. Other Silent PSU's will have a higher chassis- and operating temperature and less good airflow, due to the reduced fan speed. Then you would just need additional case fans, that in return will result in higher noise levels. Pointless!


Does the Chill Power Supplies fit all computer cases and motherboards?
The latest Chill Power Supply series fit all cases and motherboards complying with the ATX 2.x standard. Older hardware, typically from before year 2003-2005, might be based on the older out phased ATX1.x standard featuring other specifications and a -5V rail among others. Check your documentation for requirements / compliance. Most of our older models features ATX1.3 compliance including a -5V rail (check output specifications / PSU label), but these models are no longer in production since mid 2006.

All of our 'Modular' based Power Supplies comes with extended 20/24-pin Main-ATX and ATX12V/EPS12V cable length, in order to offer better support for PC cases with bottom mounted Power Supply.


How does the RPM Monitor feature works?
Your motherboard has to support this feature. Connect the signal cable from the PSU to a 3-pin POWER/CASE FAN plug on the motherboard. Monitor software should be supplied with the motherboard or 3rd party. With this feature you will be able to monitor the fan speed of the built-in fan to ensure it is running properly and to get an idea of your current load/temperature conditions inside.


Can I count on the Voltages readings provided by the Mainboard/BIOS?
No, not at all unfortunately!. The only way to get accurate voltage readings is to use a good Multimeter / Voltmeter. It is not unusual the motherboard probe readings will differ up to +/- 1V from the actual rating.


Can I count on my 'Energy meter' when measuring PC Power / Standby consumption?
Unfortunately, most cheaper 'Energy meters' cannot measure inductive load from Switch Mode based products correctly. Computer Power Supplies, as well as most other modern home electronics like televisions, DVD / Blue-ray players, game consoles etc. are based on Switch Mode technology. On such products you will get incorrect Watt readings, especially for lower loads, such as Standby consumption.

Make sure your 'Energy meter' has inductive / Switch Mode support in order to get correct readings. However it does take expensive PRO equipment for fully accurate readings on Switch Mode based products.

All current Chill Power Supply models only have 0,4 - 0,9W Standby consumption. Please notice, that your motherboard and connected USB devices etc. also might have a standby consumption. You can normally adjust BIOS/jumper settings to prevent USB ports to be powered during standby and also disable Ethernet features like Wake-On-Lan (WOL) etc. which require standby power.

The Spar-O-Meter from the Danish Energy Saving trust can measure inductive load to some extend. 

Tilbehør

6 andre produkter i den samme kategori:

Forskel 0

Ingen varer

Skal først fastlægges Levering:
DKK 0,00 Moms:
DKK 0,00 Total:

Til kassen