Chill CP-450F 450W ATX Strømforsyning, +85%

- Ægte 450W Ultra stabilt output
- 120 mm Ultra Silent Fan
- +85% Effektivitet, <1W standby
- Aktiv PFC (> 0,9 PF)
- Dual 12V linjer
- High-Grade "Long-Life 'kondensatorer
- Fuld sort Kabelflex
- Aftageligt 20/24-pin ATX kabel
- Aftageligt 4/8-pin EPS12V kabel
- ATX 2.3 & EPS 2.92 Design
- Energy Star V5.0 Design
- RPM Monitor kabel

Flere detaljer

CP-450F
Ny

Føj til Sammenlign

 
Mere info

Udgået!

Chill CP-450F ATX strømforsyningen (PSU) leverer ægte 450W ydelse ved helt op til 50°C, ultra høj effektivitet (85%) samt State-of-the-Art støj / termisk blæserstyring for den krævende bruger. Selv ved høj belastning vil denne avanceret PSU levere branchens laveste støj/ydelses-forhold.

Chill CP-450F er udstyret med high-grade komponenter, Long-Life 105°C kondensatorer samt Dual 12V linjer for at sikre et højt ydelses- og stabilitesniveau. Den er udstyret med 8-pin EPS12V stik til Dual / Quad Core-systemer og har endda PCI-Express V2 (6 +2 pin) tilslutning til krævende VGA-kort. Denne strømforsyning overholder også RoHS-direktivet (Restriction of Hazardous Substances), der begrænser brugen af bly og andre skadelige stoffer. Sammen med den ultra høje, Energy Star V5.0 kompatible, +85% effektivitetsgrad samt lave standby-forbrug (<1W), er dette ikke kun til gavn for miljøet, men også din elregning. Strømforsyningen er også udstyret med Active PFC kredsløb (Power Factor Correction) for optimal udnyttelse af strømmen.

Det meget lave støjniveau har altid været et vigtig kendetegn for Chill strømforsyninger, og fortsætter med at forbløffe støj entusiaster rundt om i verden. Den avancerede termiske blæserstyring giver overlegen varmeafledning i forhold til konventionelle strømforsyninger. Den 120mm Ultra-støjsvage blæser vil ikke blot  forholde sig støjsvag i tomgang / normal belastning som de fleste andre støjsvage PSU'er, men også ved høje belastninger. Den kan endda forbedre luftstrømmen og nedsætte den samlet PC  system temperatur. RPM Monitor (omdrejninger per minut) funktionen lader dig overvåge hastigheden på den indbygget blæser (kræver 3-pin Power fan stik på bundkortet). Se det er True Power - No Noise!

Skriv en anmeldelse

Chill CP-450F 450W ATX Strømforsyning, +85%

- Ægte 450W Ultra stabilt output
- 120 mm Ultra Silent Fan
- +85% Effektivitet, <1W standby
- Aktiv PFC (> 0,9 PF)
- Dual 12V linjer
- High-Grade "Long-Life 'kondensatorer
- Fuld sort Kabelflex
- Aftageligt 20/24-pin ATX kabel
- Aftageligt 4/8-pin EPS12V kabel
- ATX 2.3 & EPS 2.92 Design
- Energy Star V5.0 Design
- RPM Monitor kabel

Skriv en anmeldelse

 
FAQ

Chill Innovation ATX Power Supplies: 

Will the Chill Power Supplies increase my system temperature due to the virtually silent operation?
No, our heat dissipation technology is superior to most conventional Power Supplies and will actually help reducing your system temperature and improve case airflow. Other Silent PSU's will have a higher chassis- and operating temperature and less good airflow, due to the reduced fan speed. Then you would just need additional case fans, that in return will result in higher noise levels. Pointless!


Does the Chill Power Supplies fit all computer cases and motherboards?
The latest Chill Power Supply series fit all cases and motherboards complying with the ATX 2.x standard. Older hardware, typically from before year 2003-2005, might be based on the older out phased ATX1.x standard featuring other specifications and a -5V rail among others. Check your documentation for requirements / compliance. Most of our older models features ATX1.3 compliance including a -5V rail (check output specifications / PSU label), but these models are no longer in production since mid 2006.

All of our 'Modular' based Power Supplies comes with extended 20/24-pin Main-ATX and ATX12V/EPS12V cable length, in order to offer better support for PC cases with bottom mounted Power Supply.


How does the RPM Monitor feature works?
Your motherboard has to support this feature. Connect the signal cable from the PSU to a 3-pin POWER/CASE FAN plug on the motherboard. Monitor software should be supplied with the motherboard or 3rd party. With this feature you will be able to monitor the fan speed of the built-in fan to ensure it is running properly and to get an idea of your current load/temperature conditions inside.


Can I count on the Voltages readings provided by the Mainboard/BIOS?
No, not at all unfortunately!. The only way to get accurate voltage readings is to use a good Multimeter / Voltmeter. It is not unusual the motherboard probe readings will differ up to +/- 1V from the actual rating.


Can I count on my 'Energy meter' when measuring PC Power / Standby consumption?
Unfortunately, most cheaper 'Energy meters' cannot measure inductive load from Switch Mode based products correctly. Computer Power Supplies, as well as most other modern home electronics like televisions, DVD / Blue-ray players, game consoles etc. are based on Switch Mode technology. On such products you will get incorrect Watt readings, especially for lower loads, such as Standby consumption.

Make sure your 'Energy meter' has inductive / Switch Mode support in order to get correct readings. However it does take expensive PRO equipment for fully accurate readings on Switch Mode based products.

All current Chill Power Supply models only have 0,4 - 0,9W Standby consumption. Please notice, that your motherboard and connected USB devices etc. also might have a standby consumption. You can normally adjust BIOS/jumper settings to prevent USB ports to be powered during standby and also disable Ethernet features like Wake-On-Lan (WOL) etc. which require standby power.

The Spar-O-Meter from the Danish Energy Saving trust can measure inductive load to some extend. 

Tilbehør

6 andre produkter i den samme kategori:

Forskel 0

Ingen varer

Skal først fastlægges Levering:
DKK 0,00 Moms:
DKK 0,00 Total:

Til kassen